[Federal Register Volume 88, Number 103 (Tuesday, May 30, 2023)]
[Rules and Regulations]
[Pages 34452-34453]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-11407]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Part 60
[EPA-HQ-OAR-2020-0556; FRL-8335-05-OAR]
RIN 2060-AV35
Testing Provisions for Air Emission Sources; Correction
AGENCY: Environmental Protection Agency (EPA).
ACTION: Final rule; correction.
-----------------------------------------------------------------------
SUMMARY: The Environmental Protection Agency (EPA) is correcting a
final rule that was published in the Federal Register on March 29,
2023, that will be effective on May 30, 2023. The final rule corrected
and updated regulations for source testing of emissions. This
correction does not change any final action taken by the EPA on March
29, 2023; this action merely corrects the amendatory instruction.
DATES: This correction is effective May 30, 2023. On March 29, 2023,
the Director of the Federal Register approved the material listed in
this correction for incorporation by reference as of May 30, 2023.
ADDRESSES: The EPA has established a docket for this action under
Docket ID No. EPA-HQ-OAR-2020-0556. All documents in the docket are
listed on the www.regulations.gov website. Although listed in the
index, some information is not publicly available, e.g., confidential
business information or other information whose disclosure is
restricted by statute. Certain other material, such as copyrighted
material, is not placed on the internet and will be publicly available
only in hard copy. Publicly available docket materials are available
electronically through www.regulations.gov.
FOR FURTHER INFORMATION CONTACT: Mrs. Lula H. Melton, Office of Air
Quality Planning and Standards, Air Quality Assessment Division (E143-
02), Environmental Protection Agency, Research Triangle Park, NC 27711;
telephone number: (919) 541-2910; fax number: (919) 541-0516; email
address: [email protected].
SUPPLEMENTARY INFORMATION: In the final rule published on March 29,
2023 (88 FR 18396), the following correction to an amendatory
instruction to ``Part 60--Standards of Performance for New Stationary
Sources, Subpart A--General Provisions'' is made.
Correction
In FR Doc. 2023-04956, appearing on page 18396 in the Federal
Register of March 29, 2023, the following correction is made. On page
18402, in
[[Page 34453]]
the first column, amendatory instruction 4 and the corresponding
regulatory text is corrected to read as follows:
0
4. Amend Sec. 60.17 by:
0
a. Revising paragraphs (h)(187) and (201);
0
b. Redesignating paragraphs (h)(202) through (222) as paragraphs
(h)(203) through (223), respectively; and
0
c. Adding new paragraph (h)(202).
The revisions and addition read as follows:
Sec. 60.17 Incorporations by reference.
* * * * *
(h) * * *
(187) ASTM D6216-20, Standard Practice for Opacity Monitor
Manufacturers to Certify Conformance with Design and Performance
Specifications, approved September 1, 2020; IBR approved for appendix B
to part 60.
* * * * *
(201) ASTM D6784-02 (Reapproved 2008), Standard Test Method for
Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas
Generated from Coal-Fired Stationary Sources (Ontario Hydro Method),
approved April 1, 2008; IBR approved for Sec. 60.56c(b).
(202) ASTM D6784-16, Standard Test Method for Elemental, Oxidized,
Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired
Stationary Sources (Ontario Hydro Method), approved March 1, 2016; IBR
approved for appendix B to part 60.
* * * * *
Dated: May 24, 2023.
Richard A. Wayland,
Director, Air Quality Assessment Division, Office of Air Quality
Planning and Standards.
[FR Doc. 2023-11407 Filed 5-26-23; 8:45 am]
BILLING CODE 6560-50-P